توضیح تصویر
Ernest
collapsible bulk container

 How to use plastic trays safely and for a long time
1, plastic trays should avoid sun exposure, so as not to cause aging, shorten the service life.
2. It is strictly forbidden to throw the goods from a high place in the plastic collapsible bulk container pallet. Reasonably determine how goods are stacked in plastic pallets. The goods are placed evenly, do not stack centrally, eccentric stacking. Plastic pallets carrying heavy loads should be placed on a flat ground or on the surface of an object.
3. It is strictly forbidden to throw the plastic tray from a high place to avoid crushing and cracking the plastic tray due to violent impact.
4. When the forklift or manual hydraulic truck is operated, the fork thorn should be leaned against the outside of the plastic tray fork hole as much as possible, and the fork thorn should all reach into the plastic tray, and the angle can be changed after the plastic tray is lifted smoothly. Fork thorns should not hit the side of the plastic collapsible pallet box tray to avoid breaking and cracking the plastic tray.
5. When the plastic pallet is on the shelf, the shelf-type plastic pallet must be used, and the bearing capacity is determined according to the shelf structure, and overloading is strictly prohibited.
According to the type of goods, the quality of the goods carried in the pallets and the size of the pallets, it is reasonable to determine the way the goods are stacked on the pallets. The utilization rate of the bearing surface area of the pallet should generally not be less than 80%. For the palletizing of goods, there are the following requirements:
A. Rigid histogram goods such as wood, paper and metal containers are staggered and stacked in single or multiple layers, and packaged with stretch or shrink film;
B. Paper or fibrous goods are stacked in multiple layers of single-layer goods and sealed with strapping belts.
C. Sealed metal containers and other cylinder goods are stacked in single or multi-layer stacks, and the wooden cargo cover is reinforced.
D. Paper products that need to be protected against foldable bulk container moisture and waterproof, textile goods such as single or multi-layer staggered stacking, stretching or shrinking film packaging goods to increase corner support, cargo cover partition and other reinforcement structures; Fragile goods are stacked one-way or multi-layered, and wooden support partitions are added Plate structure.
E. Metal cylinder containers or single-layer vertical stacking of goods, increase the cargo frame and slats to strengthen the structure;
F. Multi-layer staggered compaction of bagged goods.
When purchasing plastic trash cans, how to distinguish the quality of plastic trash cans?
1. Color
To first look at the color of the plastic garbage can, good quality plastic garbage can, plastic garbage can color bright, has a better luster, and poor quality plastic garbage can, the color of the garbage can is dull, gloss is not enough.
2. Weight
Looking at the weight, in general, the same specifications of plastic garbage cans, if the same material is used, of course, the heavier the better, but this is also the most deceptive trap, not with integrity of plastic plastic bulk containers garbage can manufacturers, will add stones to the plastic garbage cans Powder (calcium carbonate) increases the weight of plastic garbage cans, but such a consequence is that the toughness of plastic garbage cans is reduced, it is easy to break, and the service life of plastic garbage cans is greatly shortened.
3. Quality
When purchasing, you can press the plastic trash can, so that it has a certain deformation, if it is not broken, the plastic trash can is relatively good in quality, and the plastic trash can with poor quality will be damaged after a little pressing, but if you want to buy the plastic trash can quality The amount is doubtful, do not stand on the plastic trash can to try its bearing capacity, otherwise, once broken, it is very easy to be scratched.

[ چهارشنبه 25 خرداد 1401 ] [ 12:54 ] [ Ernest ]

[ ]


euro plastic pallet

 Plastic pallets play an important role as an indispensable part of the warehousing and logistics industry.
If the plastic pallet is used in accordance with the correct use specifications, it can not only give full play to its own role, but also extend its service life and reduce the euro plastic pallet procurement cost of plastic pallets.
When using plastic trays, you should pay attention to the following points:
1. The plastic tray should be gently placed to avoid uneven force and damage when landing.
2. When placing goods, it should be heavy duty plastic pallet placed evenly to avoid side distortion when lifting and handling.
3. When using handling equipment, consider whether the size of the cargo difference is suitable for the use of this plastic pallet, so as to avoid the size is not suitable and break the plastic pallet.
4. When stacking, the load bearing of the bottom piece of pallet should be considered.
The correct use of plastic pallets should be able to achieve packaging combination code on the plastic pallet plus appropriate strapping and wrapping, easy to use mechanical loading and unloading and transportation, so as to meet the requirements of loading, unloading, transportation and storage.
In order for plastic pallets to be used safely for a long time, use plastic pallets correctly:
1. Plastic trays should avoid sun exposure, so as not to cause aging and shorten the service life.
2. It is strictly forbidden to throw goods from a high place stackable plastic pallets into plastic pallets. Reasonably determine how the goods are stacked in the pallet. The goods are placed evenly, do not stack centrally, eccentric stacking. Trays carrying heavy loads should be placed on a flat ground or on the surface of an object. 3. It is strictly forbidden to throw the plastic tray from a high place to avoid crushing and cracking the pallet due to violent impact.
4. When the forklift or manual hydraulic truck is operated, the fork thorn should be as close as possible to the outside of the fork hole of the tray, and the fork thorn should all reach into the tray, and the angle can be plastic pallet box changed after the tray is lifted smoothly. The fork thorn should not hit the side of the tray to avoid crushing and cracking of the tray.
5. When the pallet is on the shelf, the shelf type pallet must be used, and the load capacity is determined according to the shelf structure, and overloading is strictly prohibited.
6. When carrying corrosive items, pay attention to the packaging and loading of items to avoid pollution to the pallets.
7. When using plastic trays, try not to put them in a damp and dark place, so as not to affect the service life of plastic trays.

[ چهارشنبه 25 خرداد 1401 ] [ 12:54 ] [ Ernest ]

[ ]


plastic pallet supplier

 According to the type of goods, the quality of the goods carried in the pallets and the size of the pallets, it is reasonable to determine the way the goods are stacked on the pallets. The utilization rate of the bearing surface area of the pallet should generally not be less than 80%. For the palletizing of goods, there are the following requirements:
1. Wooden, paper and metal containers and other hard histogram goods single or multi-layer staggered stacking, stretch or shrink film packaging;
2. Paper or fibrous goods are stacked in multiple layers plastic pallet supplier of single-layer goods and sealed with strapping belts;
3. Sealed metal containers and other cylindrical goods are stacked in single or multi-layer stacks, and the wooden cargo cover is reinforced.
4. Paper products that need to be protected by moisture and waterproof, textile goods such as single or multi-layer staggered stacking, stretching or shrinking film packaging goods to increase corner support, cargo cover partition and other reinforcement structures;
5. Fragile goods are stacked one-way or multi-layer, and the wooden support partition structure is added;
6. Metal bottle cylindrical containers or single-layer vertical stacking of goods, increase the cargo frame and slats to strengthen the structure;
7. Multi-layer staggered compaction of bagged goods.
The main ways for the goods carried by the pallet to be fixed are bundled and glued.
After the goods carried by the pallet are fixed, they still cannot meet the transportation to be coupled, and the protective reinforcement accessories should be selected according to the needs. Reinforcement protective accessories are made of paper, wood, plastic, metal or other materials.
Plastic pallet manufacturing process.
The first: vacuum blister molding method.
There are also two types of plastic trays produced by vacuum blister molding. Single-sided blister trays are mostly used for small motors (such as vacuum cleaner motors, power tool motors, etc.) and wire trays and other packaging, transportation, recently developed rapidly, and dedicated Mainly. The double-sided blister tray is assembled and divided into 2 forms: the drum spill containment upper half is extruded fixed-length and fixed-width plastic sheet, and the lower half is a large vacuum blister product; The upper and lower halves are large vacuum blister products. This method requires large production molding Of the vacuum blister equipment, the equipment cost is lower, the mold cost is also lower, but the product wall thickness is uneven.
The second kind: extrusion - hollow blow molding method.
The extrusion-hollow blow molding of plastic trays is similar to the general blow molding method of hollow products, but because its products are larger and double-sided, it requires a larger extruder, clamping machine and mold, etc., but the input of molds and equipment is more than injection molding The type is much smaller, the process is simple, the cost is lower, but the product is not dense, the flatness is poor, and it is difficult to control the wall thickness uniformly.
The third: extrusion molding method.
The plastic trays produced by this method are assembled. That is, extruders, machine heads and other equipment are used to extrude slats for the upper and lower panels and I-shaped connection plates with wings as connecting supports, respectively, and then assembled. Wood-plastic composites The emergence of plastic trays has promoted the development of extrusion spill plastic pallet molding plastic trays. It is based on natural plant fibers (including wood flour fruit shells, straw powder, rice bran, etc.) and waste plastics as the main raw materials, so that the plastic tray has both a woody feeling, but also has water resistance and insect pest resistance Advantages, and can be planed, sawn, nailed.
The fourth: injection molding method.
The plastic tray products produced by injection molding method are flat, smooth, structured and dense, and the product design freedom is large, which is divided into double-sided integral plastic pallets and double-sided assembled plastic pallets.
Double-sided assembly pallet, that is, double-sided integral pallet is divided into upper and lower pieces, which are injection molded and then assembled. Although this product requires 2 pairs of molds, the mold structure is greatly reduced, and the total investment in the mold is still cheaper than the integral type, and the equipment is locked.
The requirements of mold force are also reduced, and the clamping force ≥ 1500 tons, which is relatively easy for general plastic processing plants. This mode of production may become the mainstream of plastic pallet production.

[ چهارشنبه 25 خرداد 1401 ] [ 12:54 ] [ Ernest ]

[ ]


wholesale plastic pallet

 Plastic tray is the necessary equipment, warehousing logistics is the tense object of contemporary transportation, warehousing, packaging, widely used in food, machinery, automobiles, tobacco, medicine, chemical industry, flat storage, etc, with light weight, application, long service life, corrosion resistance, Regards, the intensity is high, the cycle used strengths, such as plastic tray is widely used in storage and transportation of products storage and transportation.
Plastic tray in accordance with the modelling of classification are as follows:
Type 1, double-sided applied plastic tray: flat-panel wholesale plastic pallet double-sided plastic tray; Grid type double-sided plastic tray
Flat type double-sided plastic tray:
2, single applied plastic tray: tablet nine foot type plastic tray; Grid nine foot type plastic tray flat field type plastic tray; Grid field type plastic tray tablet sichuan type plastic tray; Grid sichuan type plastic tray
3, light plastic tray (proper product imported packaging of disposable packaging applications or a lighter load of product application). Products are divided into grid type and flat.
Plastic tray in accordance with the application of classification are as follows:
1, the standard plastic tray
2, shelf type plastic tray
3, light plastic tray, learn from Japan, Germany skills, reasonable layout design, on the basis of domestic, the tide is the most common use of a, can be applied in high altitude stacking, four-way into the fork.
The role of plastic tray by gathering plastic tray
1, the selection of single or wholesale plastic pallet double plastic tray, plastic tray tray should be based on corresponding storage, loading and unloading handling equipment and state (such as libraries, the types of shelves, stacking or place state, etc.) to determine. To cover an area of an area small automatic three-dimensional library and high quality
Frame, mainly stacker or electric lift trucks in the vertical transport of occasions, one shelf series tray and double shelves series tray can choose.
2, if in the three-dimensional library or shelf load up to 1 t, and shelf no ceiling, suggested that steel tube with built-in shelf tray. Built-in pipe steel-plastic structure tray effectively solved the greater the deadweight shelves product weight, the cost is high Old problem, more important is the use of square steel tube wall thickness is about 2 mm rigidity, reached the shelves (three-dimensional library) of horizontal and vertical deflection are 10 mm or less strict requirements, at the same time reduce the permanent deformation and reduce the cost.
3, for covering an area of big and predominantly horizontal mobile garbage bin transportation situation, if use manual hydraulic pallet truck carrying suited to choose single pallets. Stacking goods, if necessary to the bottom of the tray above and below the goods collocated, with double-sided plastic tray or field Type words at the end of the single tray is better. If use can motor pallet truck is suitable for handling with nine article not connected at the bottom of foot type single pallets.

[ چهارشنبه 25 خرداد 1401 ] [ 12:53 ] [ Ernest ]

[ ]


صفحه قبل 1 صفحه بعد